JunOS: Copy & Paste configuration directly on terminal.

The command load replace terminal can be used to copy a configuration from a text file to a Juniper device.

After executing this command the router will start accepting configuration data via the paste option.

To exit this mode use the CTRL-D or ^D, this will exit from the terminal mode and return back to device prompt.

Example Follows:

root@gw-srx-01# load replace terminal   
[Type ^D at a new line to end input]
interfaces {
    reth0 {
        redundant-ether-options {
            redundancy-group 1;
        }
        unit 0 {
            family inet {
                filter {
                    input INPUT_RETH0.0_Filter;
                }
                address 10.0.0.1/24;
            }
        }
    }
    reth1 {
        redundant-ether-options {
            redundancy-group 1;
        }
        unit 0 {
            family inet {
                address 192.168.0.1/24;
            }
        }
    }
}
^D
load complete
 
[edit]
root@gw-srx-01# commit